A while ago I bought a FLIR Lepton™, and put it in an older PI I have lying around. I added a Waveshare Monitor and hacked the whole together in a Mad Max retro setup to Plywood.
I used the Lepton Module software here . It was good fun to set up and investigate where our conservatory is leaking heat.
Warming Sunrays
If you acquired the Pi-Sense-Hat you might want to get started with a nice simple python script to show the temperature on the LED field.
Continue reading A simple temperature and humidity display for the Pi Sense-Hat
While installing the sense-hat on my Raspberry Pi 2 Model B, I noticed that the temperatures were off by 10 degrees as the the Pi heated up. I had a Pi Hut Heatsink installed.
Continue reading Alternative Raspberry Pi Sense-Hat installation with Ribbon Cable
Installing a Waveshare 7 inch Capacitive Touch Screen LCD 1024×600 HDMI interface For Raspberry Pi/BB BLACK/PC/Various Systems
Continue reading Installing a Waveshare 7 inch Capacitive Touch Screen LCD 1024×600 HDMI interface For Raspberry Pi/BB BLACK/PC/Various Systems
While installing a Waveshare 7 inch Capacitive Touch Screen LCD 1024×600 monitor with a PI Sense-Hat on Raspberry PI2 Model B, I ran into the problem that after successful Sense-Hat install the LCD stayed permanently on.
Continue reading Pi2 Sense-Hat with Waveshare 7 inch Capacitive Touch Screen LCD 1024×600
